NEOLUBE® NO. 2 is an exceptionally stable compound of processed micro graphite and thermoplastic resin in isopropanol.  Coatings are easily applied to an ultra-thin opaque film during manufacture or assembly by brush, spray or dipping; it dries in seconds to a slippery, lustrous, adherent film of purest graphite.  

• HIGH CHEMICAL PURITY
• LOW HALOGEN CONTENT
• DRY FILM LUBRICANT
• NUCLEAR GRADE

NEOLUBE® NO. 2 is a dry film conductive lubricant used extensively at nuclear power generating plants and other nuclear facilities as an anti-seize compound, thread lubricant and for lubricating moving parts and rubbing surfaces.  The thinness of the coating, coupled with high lubricity, provides clean long wearing lubrication without redesign of component dimensions.

NEOLUBE® NO. 2 is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics. NEOLUBE® NO. 2 has the ability to vary conductivity.

NEOLUBE® NO. 2 resists abrasion and lubricates threaded parts, moving parts and rubbing surfaces.  This material allows easier assembly and nondestructive disassembly.  

NEOLUBE® NO. 2 does not migrate, is non-freezable and has high chemical purity.  NEOLUBE® NO. 2 provide a non-corrosive dry adherent lubrication for metal parts with limited clearances in applications where control of impurities is required.

NEOLUBE® NO. 2 IS NOT RECOMMENDED FOR LUBRICATING THREADS IN THE REACTOR PRIMARY CONTAINMENT AREAS, WHERE OPERATING TEMPERATURES FOR THE FITTINGS ARE GREATER THAN 400°F.  NEOLUBE® NO. 1260 IS RECOMMENDED FOR USE IN CONTAINMENT AND/OR SECONDARY SIDE IN NUCLEAR APPLICATIONS.  NEOLUBE® NO. 2 IS NOT RECOMMENDED FOR USE IN AN OXYGEN ENVIRONMENT.   

Mercury Certification:  Instruments and equipment containing Mercury or compounds of Mercury are not used in the manufacture and packaging of NEOLUBE® NO. 2, nor in testing or inspection, unless samples are discarded after tests.  Compounds containing Boron are not used in cleaning, nor processing equipment, nor containers.  There is no intentional addition of low melting point metals (Lead, Bismuth, Zinc, Mercury, Antimony, Cadmium or Tin) to this product, nor of Copper or Silver.  This product is not approved by NSF for drinking water applications.  

PHYSICAL PROPERTIES

(Wet Product)

• Pigment: Colloidal Graphite
• Binder: Thermoplastic Resins
• Carrier: Isopropanol
• Diluents: Isopropanol
• Color: Black
• Temperature Range: -70°F – 400°F
• Flash Point: 52°F (11.11°C) Pensky-Martens Closed Tester
• Consistency: Thixotropic Gel
• Density: 6.6 lbs/gal (0.8 kg/l)
• Shelf Life: No Limit in Closed Container
• VOC: 766 g/l (6.4 lbs/gal)
• Approximate Coverage: 63 sq. ft/gal@1mil

(As Cured)

• Color: Black
• Coefficient of Friction: 0.19 (Static) (0.030 – 0.090) **
• Service Temperature Continuous: 400°F (204°C) ***
• Intermittent Temperature: 850°F (454°C)
• Sheet Resistance: <2400 ohms/sq@25µm (1 mil) dry film thickness

The binder, which is present to prevent rub-off during assembly, slowly decomposes above 200°F (93°C).

PROVEN APPLICATIONS for NEOSAFE No 2

Industrial applications of NEOLUBE® NO. 2 include those where oils or greases, because of their very nature, are inadequate or objectionable.  Oils collect dust, burn off or congeal; drip, soil and insulate.  When used within load limits, NEOLUBE® NO. 2 is an adequate substitute for oils or greases with none of their disadvantages.  (DO NOT USE NEOLUBE® NO. 2 ON BALL OR ROLLER BEARINGS.)  

Other proven applications for NEOSAFE No 2 include:

1. Non-seize lubricant for bolts-metals-valves.
2. Anti-seize lubricant for stainless steel bolts.
3. Mating surfaces of assemblies and machinery components.
4. Lubricant for high-pressure air fittings or hydraulic systems.
5. Lubricant for buss bars carrying contact shoes, high tension switch contacts. Reduces chatter, arcing and pitting.
6. Static bleeding of conveyor belts; lubricate conveyor chains in degreasing operations; reduce static on floors.
7. Excellent shielding properties for certain types of electric interference. 
8. Prevents radio wave interference. 
9. Maybe used in printed circuit techniques, static bleed. 
10. Used for shielding tape recorder cases.
11. Coating for gaskets, grid coating for cathode ray tubes.
12. Cutting lubricant on difficult metal cutting jobs.
13. Ideal source for graphite films in nuclear applications.
14. Ideal where a dry film lubricant prevents soiling as in:  knitting, weaving and lace-making machines.
15. Excellent for die and mold pretreatment conditioners. 
16. Protects from atmospheric elements and aids in initial lubricant.
17. Engine components for assembly and break-in requirements.
18. Automotive and industrial gaskets.
19. Rubber components (assembly and break-in).
20. Opaque coating for film negatives.
21. Low noise communication cables.
22. Impregnation of fibers and paper.
23. High-resistance coating on plastics.

MIXING/BLENDING/DILUTION

NEOLUBE® NO. 2 is supplied in a Ready-For-Use form.  MIX UNIFORMLY PRIOR TO USE.  If dilution is required, use isopropanol (or equivalent) to the consistency required by the application method chosen. NEOLUBE® NO. 2 is intended for spray application, however, application by brush, dip or roller can be used. Always mix uniformly just prior to use. 

Typical film thickness ranges from 0.2 to 0.5 mil (5-12 microns). A coating of 1 mil (25 microns) of NEOLUBE® NO. 2 is best built up by the application of 5 coats of 0.2 mil thickness by spray application.  

SURFACE PREPARATION

Substrates to be coated must be clean and dry. A solvent wipe with air dry is sufficient for smooth surfaces. For porous surfaces, use the same procedure followed by heating to drive off entrapped contaminants, solvents or moisture.

CURING

The coating air dries to the touch in 5 minutes and is ready for use in 30 minutes. Following the air dry, bake for 5 minutes at 75°C (167°F) to achieve optimum coating qualities in a shorter curing cycle. 

AVAILABLE SIZES

2 Ounce – Brush in Cap Bottle, Pint, Quart, Gallon and 5 Gallon Containers.

REGULATORY RATINGS

• UN1219, Isopropanol, 3, II
• ERG Guide 129 – Flammable Liquid
• INFOTRAC: 1-800-535-5053 U.S. (HURON 89770) 
• HMIS = H1/F3/R0/PP-B
• NFPA = H1/F3/R0/SH-N/A
  
  

Use the customary safeguards in storing, handling and applying flammable materials of this type.  Insure adequate ventilation.  A Safety Data Sheet is furnished with each shipment.

STORAGE

Keep from freezing.  Keep container tightly closed when not in use.  Store in a cool, well ventilated area.  Keep away from heat, sparks and open flame.  Protect material from direct sunlight. Ground and bond containers when transferring materials. Empty containers may retain hazardous properties.  Follow all SDS/label warnings even after container is emptied.

HEALTH & SAFETY

Flammable.  Harmful if swallowed, inhaled, or absorbed through skin.  May cause eye irritation.  Wash thoroughly after handling.  Keep away from heat, sparks, and open flame.  Keep container tightly closed when not in use.  Use with adequate ventilation.  Avoid breathing vapor.  See Safety Data Sheet for proper first aid instructions.

A product certification is available for each batch and shipment.

NEOLUBE® is available certified to Military Specification MIL-L-24131 (Specify NEOLUBE® NO.  1)

NEOLUBE® products are not considered safety-related goods.  As such, they are not designed, fabricated, handled, shipped, stored, etc., under a quality assurance program, which complies with the requirements of 10CFR50 , Appendix B, 10CFR21, or ANSI.

*Also listed in some specifications as NEOLUBE® >B=.

**Machine Design – June 1967 – ATorquing Stresses in Lubricated Bolts@

***The binding resin, which is present to prevent rub-off during assembly,      slowly decomposes above 200°F (93°C).

Information presented in this Technical Data Sheet is considered reliable, but conditions and methods of use, which are beyond our control, may modify results.  Before adopting our products for commercial use, the user should confirm their suitability.  In no case should recommendations or suggestions for the use of our products be understood to sanction violation of any patent. NEOLUBE® is a Registered Trademark of Huron Industries, Inc.

With proper safety and handling practices, Neolube No. 1 is a great product for your industrial applications. It has been approved for use by the Naval Ship Engineering Center, in Hyattsville, Maryland, and has passed stringent requirements for lubricating applications of commercial and naval nuclear reactor systems. Call Huron Industries today to find out more information.

The post NEOLUBE® NO. 2 LUBRICANT – COLLOIDAL GRAPHITE IN ISOPROPANOL appeared first on NEOLUBE® Industrial Dry Lubricants.

Application

It comes in a ready to use form so you can quickly start your projects. It is easily applied with a brush or roller to clean and dry surfaces. It will air dry in 5 minutes and ready for use in 30, making Neolube No. 2 a practical product. 

Health and Safety

This product is flammable so store and handle with care. Use appropriate PPE when using the Neolube as it should not be inhaled, swallowed, or come into contact with skin. Immediate medical attention should be administered in such cases. Re-seal the container tightly after use and store it in a dry, cool area with lots of ventilation. Protect from direct sunlight.

While designed as an industrial lubricant, Neolube has found its way into hobby projects. It performs well as a fast-drying, paintable solution when looking for a steel-like appearance. Model railroaders use the product to give plastic models the look of metal and the added bonus of lubrication. Cosplay enthusiasts also use Neolube for “painting armor” in the costume designs with excellent results. 

Ultimately Neolube is a versatile lubricating product that has been used to enhance both industrial components and hobby crafts alike. Huron Industries is a globally recognized provider of innovative specialty lubricants and sealants for lubricating and sealing the internal and auxiliary equipment mechanisms of commercial and naval nuclear reactor systems. Contact us for more information.

The post Neolube No. 2 Uses appeared first on NEOLUBE® Industrial Dry Lubricants.

What is the composition of Neolube No.2?

Neolube’s product material has a composition that is made out of 99% pure furnace graphite particles, a thermoplastic resin, and isopropanol. It is a thin, non-corrosive film that has excellent radiation resistance and high chemical purity. It is easy to apply by spray, dip, or brush and has excellent adhesion after a fast air dry. 

Neolube No.2 for model trains

When it comes to model trains, Neolube No. 2 can be used to blacken metal parts. It’s versatile and can be used for rails of track, steam locomotives, drivers and valve gears. Neolube No. 2 also serves as a lubricant for model parts, ensuring it runs smoothly. It is easy to use and can be applied with a regular paint brush. With so many benefits, it is easy to see why it is a popular  graphite alcohol solution for model trains.

Why use Neolube for model trains?

1. It is easily applied

Neolube is a fast-drying paintable solution, making it ideal for easy applications. Although, used in the same manner as paint, it is a lubricant, hence why it is a non-oily residue – perfect for moving parts that you don’t want to mess up. It is also formulated to cure without the use of heat or activators. Higher temperatures will speed cure; lower temperatures will retard the curing process.

2. As a paint, it shines

If furnished, your model train will shine like polished steel with its use. Due to its adhesive technical properties, Neolube will not chemically blacken or harm your model train. 

Note: It should be tested on surfaces first to ensure this. Optimum results will be obtained on clean fittings.

3. It is easy to touch up

If mistakes occur, Neolube can be rubbed off with effort. Cured products can be removed with a combination of soaking in a solvent and mechanical abrasion such as a wire brush. If touch-ups are needed, simply paint more Neolube over it and the model train will be as good as new.

4. It helps moving parts run smoothly

As a dry lubricant, it can be used on valve gears, rods, and their joints to help the moving parts to run smoothly. 

5. It is non-corrosive

Ideal for its non-corrosive properties, Neolube has an advantage for model trains with regard to maintenance and longevity as it prevents seizing, fretting, galling, and resists abrasion.

6. It is durable

Neolube will provide a 40-year service life at ambient temperature not exceeding 122°F (50°C). It can be safely used to seal threaded pipe joints for approximately 1-year at a temperature of 250°F (131°C). Under non-nuclear (standard radiation) environments, the thermal stability of the sealant can be expected at temperatures up to 400°F. It contains no directly added Lead, Zinc, Mercury, Antimony, or Copper where such elements are leachable or could be released by the breakdown of the sealant under expected environmental conditions.

Need more convincing on why you use Neolube No. 2 for model trains? Give Huron a call and we’ll assist you right away!

The post Neolube No. 2 used as Paint and Lubricant for Model Trains appeared first on NEOLUBE® Industrial Dry Lubricants.

Nuclear lubricants with conductive properties

In either case, especially in the nuclear industry, the choice of lubricant usually includes – either as a main constituent or additive – chemical compounds with naturally high levels of conductivity. Molybdenum disulfide is one example of a natural semi-conductor that serves the purpose, while also conforming to the various tribological parameters of nuclear systems.

Neolube® No. 2

While there are many conductive lubricants used in other industries, such is in the automotive design and even the production of printers, the stringent requirements of the nuclear industry mean that lubricants with conductive properties must be suitable for use under extreme temperature and pressure. An example of this is Huron Industries’ Neolube® No. 2, a dry film lubricant used in nuclear applications as an anti-seize compound, thread lubricant, or for lubricating moving parts and rubbing surfaces. Aside from its high lubricity and provision of clean, long-wearing lubrication, it also acts as a resistance coating to provide conductivity and release properties to non-conductive substrates. Its conductivity is variable, making it versatile and suitable for use on various surfaces and in a range of tribological systems.

Huron Industries manufactures a range of nuclear lubricants – including conductive lubricants – for use in power generators and other nuclear facilities. Contact us for more information on our products.

The post Conductive Lubricants appeared first on NEOLUBE® Industrial Dry Lubricants.